Turkish Client – Senior Drilling Supervisor

Februar 2023 – August 2023 · Kurdistan, Irak

• Unterstützung Programm & Ausführung im Taq-Taq-Feld (Medium-Radius-Kampagne)
• Rig-Audits, QA/QC, Zero-Discharge System Setup
• Rig-Mobilisierung, -Abnahme & -Inbetriebnahme für erste Re-Entry-Bohrung (25°/100 ft)
• Bericht an Drilling Manager

British Client – Senior Drilling Engineer

Juli 2022 – Januar 2023 · Kurdistan, Irak

• Contractor-Audits & technische Bids (Wireline, MPD, Mud Logging, DD, Rig-Services)
• QIR-Reporting & Service-Quality-Closeouts
• Qara Dagh Well-Abandonment; Sarta-Feldplanung & -support
• Bericht an Well Engineering Manager

Norwegian Client – Night Drilling Supervisor

März 2022 – Juni 2022 · Kurdistan, Irak

• Überwachung Horizontalbohren (2000 HP) im Zartek-Feld bei starken Verlusten
• Einsatz von RSS, PDM, LWD; Reporting in WellView (Peloton)
• Bericht an Drilling Superintendent

British Client – Senior Drilling & Workover Supervisor

Juni 2021 – Februar 2022 · Kurdistan, Irak

• Zwei Workovers & 3400 m MD Directional Sidetrack (2000 HP, Sarta-Feld)
• Total Loss Zonen, H₂S & Kicks; Weatherford RSS & MPD
• Completion mit 11 Swell Packers & 28% Chrome Tubulars; HSE unter Covid-19
• Bericht an Drilling Superintendent

Turkish Client – Senior Drilling Supervisor

Dezember 2019 – Juli 2020 · Kurdistan, Irak

• Horizontale Bohrung (2680 HP Sakson) im Taq-Taq-Feld, Total Losses & H₂S
• Weatherford RSS & LWD; Ausführung von Completions

Serbian Client – Drilling Superintendent

Mai 2019 – Dezember 2019 · Serbien & Rumänien

• Überwachung von sechs Rigs; Leitung kritischer Operationen
• Liner-Runs, Zementierung, Fishing & Well Control
• Zwei HT-Wells bis 4000 m MD; HSE/MWA-Audits & QIR-Programm

Serbian Client – Head of Drilling Supervision Dept.

August 2018 – Mai 2019 · Serbien & Rumänien

• Operative Verantwortung für 7 Rigs; Koordination Subcontractors
• Zwei HP/HT-Wells bis 4000 m MD; Leitung Fishing-Operation (2000 m Logging-Kabel)
• Audits; Schnittstelle zu SLB, WFT, NOV, Odfjell, Baker u. a.

Serbian Client – Senior Workover Engineer

August 2017 – August 2018 · Serbien

• Support für 21 Workover-Rigs; Performance-Monitoring & Kostenkontrolle
• HSE/MWA-Audits & Schulungen; Beschaffung Multi-Frac-Equipment
• QA/QC für Completion-Tools

Austrian Client – Senior Drilling Engineer

Februar 2015 – Juli 2015 · Abu Dhabi, VAE

• Kampagnenplanung (Thamama, Pabdeh); Well-Designs & Kosten in Landmark
• Budgetierung, SoW-Erstellung; Verhandlungen & Risikoanalysen
• Support Yemen-Kampagnen-Closeout

Austrian Client – Senior Drilling Engineer

September 2014 – Februar 2015 · Dubai, VAE

• Programme für zwei Rigs in Yemen; DWOPs, Lessons Learned, SQM, Lean Drilling
• Detailpläne, AFEs; NCRs & Deficiency Reports
• Focal Point für Service Companies; Einkauf (Liner Hangers, Casing, Bits)

Austrian Client – Senior Drilling Supervisor

April 2013 – September 2014 · Yemen

• Komplexe horizontale Wells (1500 HP, 4000 m MD); Total Losses, Gas Kick, H₂S
• Casing Drilling & UBD (Weatherford); Vortex Strings mit RSS & PDM, Turbinen
• Completions; Reporting via IDS DataNet

Kazakh Client – Senior Drilling Engineer

Juni 2011 – April 2013 · Kasachstan

• 170.000 m/Jahr Kampagne über 10 Lizenzgebiete; Support für 9 Rigs
• Beschaffung, Planung, Reporting-Systeme & Tender
• MOCs, Risikoanalysen & Notfallplanung; Materialversorgung für 120 Wells

Kazakh Client – Drilling Supervisor

Juni 2006 – Juni 2011 · Kasachstan

• Mehrere Wells bis 2500 m MD auf diversen 1000 HP-Rigs
• Well-Integrität, Ausführung, Reporting & Asset-Schutz; Crew-Training

Dutch Client – Night Drilling Supervisor

November 2005 – Juni 2006 · Kasachstan

• Nacht-Supervision (1000 HP); Leistungsbewertung Contractors & Third Parties
• Sichere & effiziente Ausführung des Bohrplans

Russian Client – Night Drilling Supervisor

November 2004 – November 2005 · Russische Föderation (Kaspische Küste)

• Horizontales Bohren (1000 HP, 3000 m MD); Kostenkontrolle & Reporting
• Durchsetzung von Arbeitssicherheit; Bericht an Senior Drilling Supervisor

Serbian Client – Junior Drilling Engineer

April 2002 – November 2004 · Kasachstan

• Support auf mehreren Rigs, Wells bis 2500 m MD
• Job-Optimierung, Reporting, Kommunikation & Lagerverwaltung

Gasproduktion / Injektor‑Well‑Pair

2.500 mMD deviated · 2.700 mMD deviated

Ort: Saxony, Germany

Rolle: Well Engineer

• Well‑Planung und Kostenschätzung (Produktion/Injection‑Paar, Helium & Kohlenwasserstoff‑Gas)
• Standortanalyse und ‑auswahl
• Technische & kommerzielle Variantenbewertung (Einzelstandorte vs. Cluster‑Pad)

CO₂‑Sequestrierungs‑Standort

1.300 mMD vertical · 1.600 mMD deviated

Ort: Switzerland

Rolle: Well Engineer / Project Manager

• Bewertung einer Explorationsbohrung für Workover & Re‑Completion zu einer CO₂‑Injection‑Well
• Well‑Integritätsprüfung, Completion‑Design, Workover‑Planung, Kostenschätzung
• Well‑Planung für eine zweite Bohrung (Injection / Monitoring)

Gasexplorationsbohrung

1.900 mMD · Deviated

Ort: Upper Austria

Rolle: Well Engineer (Support)

• Unterstützung des Senior Engineers in Well‑Planung & Projektmanagement

Gasexplorationsbohrung

700 mMD · Deviated

Ort: Upper Austria

Rolle: Well Engineer (Support)

• Unterstützung des Senior Engineers in Well‑Planung & Projektmanagement

2 × Gas‑Speicherbohrungen

2.500 mMD · Horizontal

Ort: Upper Austria

Rolle: Well Engineer (Support)

• Casing‑Design (StressCheck), EOW‑Report, PM‑Support

Geothermische Produktionsbohrung

2.500 mMD · Deviated

Ort: Upper Austria

Rolle: Well Engineer

• Well‑Planung, Kostenschätzung
• Unterstützung bei Long‑Lead‑Beschaffung
• Genehmigungsverfahren (Bewilligung erteilt)

Ölbohrung

3.000 mMD · Deviated

Ort: Upper Austria

Rolle: Well Engineer (Support) / On‑Site

• On‑Site Engineering‑Support

Workover einer Salzbohrung

1.000 mMD · Vertical

Ort: Upper Austria

Rolle: Well Engineer

• Planung & Projektsupport für Remediation zur Wiederherstellung der Well‑Integrität

Ölbohrung

—

Ort: Iran

• Weitere Details auf Anfrage.

Ölbohrung

—

Ort: Russia

• Weitere Details auf Anfrage.

Gasbohrung

—

Ort: Moravia, Czechia

• Weitere Details auf Anfrage.

Sarybulak Gas Field — 3D Dynamic Simulation (Feasibility Study)

2010/2011 · Kazakhstan

Project Objective

• Construct a reservoir simulation model based on the existing geological model.
• Initialize the model to match estimated fluids-in-place and initial pressure measurements.
• Establish a baseline prediction scenario for comparison with development cases.
• Run multiple prediction scenarios across production regimes and operating pressures.
• Provide a forecast range for economic evaluation and surface facilities planning.

Field Screening & Reserves Evaluation — Seven Fields in Kazakhstan

2010/2011 · Kazakhstan

Project Objective

• Estimate reserves for seven fields using limited available data.
• Propose investment options based on the screening outcomes.

Alternative Deliquification Lift Methods & Well Optimization — Gas/Gas-Condensate Field (Mexico)

2010/2011 · Mexico

Project Objective

• Diagnose and mitigate liquid loading in gas and condensate wells.
• Enhance production via tailored deliquification solutions.
• Define alternative lift methods to optimize well operations.

Heavy Oil Reservoir Assessment — 2D/3D Dynamic Simulation & Technology Evaluation (Llancanelo)

2011 · Argentina

Project Objective

• Assess further development of the Llancanelo heavy-oil reservoir.
• Perform geological 2D/3D modeling and 3D dynamic simulation of a selected block.
• Evaluate well flow performance and optimize gathering/surface facilities.

3D Modeling & Applied Production Technology Evaluation — Multiple Fields in Nigeria

2011 · Nigeria

Project Objective

• Re-interpret well logs, seismic, geological, lab and production data.
• Build a 3D geological model to re-estimate original and recoverable reserves.
• Use the model to plan re-development, production enhancement and problem solving.
• Develop structural and petrophysical models (V_sh, φ_eff, S_w, NTG, k) for HC-saturated reservoirs and modeled zones.

Analysis of Workover Success Rate — OMV Petrom

2011 · Romania

Objective

• Analyze workover success against company criteria by well type.
• Define success/unsuccess windows using average production, actual WO costs and expected profiles.

Design & Optimization of Intermittent Lift — Agua Fría Field (Training + Project)

2011 · Mexico

Objective

• Assess intermittent lift applicability for the Agua Fría oil field.
• Design, optimization and troubleshooting using CMS Prodex GLIP software.

Workover Best Practices — OMV Petrom

2012 · Romania

Objective

• Explain why wells require workovers and repairs.
• Identify suitable technologies/techniques and expected benefits.
• Define best-practice sequences across WO categories and required well-control equipment.

ALS (Auto-Gas Lift) Performance Analysis & Development Feasibility — Zhaikmunay Oil Field

2012 · Kazakhstan

Objective

• Evaluate technical feasibility for further reservoir development.
• Analyze applied production methods with detailed well-flow modeling.
• Optimize gathering systems and surface facilities.

Technical Evaluation of ESP Application — Daleel Field (Oman)

2012 · Oman

Objective

• Analyze ESP performance across Daleel operations.
• Evaluate and screen ESP suppliers to achieve best performance.
• Recommend continuation strategy for ESP services across fields.